DM1100 C+

Edge rounding
up to 1100mm


The DM1100 C+ performs deburring and edge rounding on laser-cut parts in a fully automated operation.

Two counter-rotating belts equipped with abrasive blocks uniformly round out all the edges of the workpiece in a safe and simple operation.

An intuitive and user-friendly touchscreen panel enables the operator to seamlessly select and adjust all the programs stored in the machine’s PLC.

Handy loading and unloading conveyor tables serve as a great complement to vastly improve the machine’s intake and output capacity.


English Catalogue
9.85 MB


Cross belt technology
Cross belt technology

Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part.

Deburring and Edge Rounding Machines - DM1100C
Small parts deburring
Small parts deburring

Excelent work on small parts down to 50x50mm.

Strong edge rounding
Strong edge rounding

Before and after DM1600 C: high performance on all edges and also on internal holes.

Automated Adjustments
Automated Adjustments

Motorized adjustments allow the operator to automatically set both thickness and cross-belt pressure by inserting the specific values on the machine’s control panel.

Parameters Storage
Parameters Storage

Enables the storage of all the parameters related to each metal part and of all the programmable controls of the machine. 

Automatic Bar Code Reader Set-up
Automatic Bar Code Reader Set-up

The bar codes can be uploaded to the machine’s PLC using a scanner. Based on the received information, the PLC then selects the program to set the right parameters for the edge rounding operation.

More Buffering Capacity (optional)
More Buffering Capacity (optional)

The machine can be equipped with loading and unloading conveyors, thus allowing for more buffering capacity and reducing the need for the operator to be constantly moving around the machine.

Abrasive Wear Compensation
Abrasive Wear Compensation

Every time this station is switched on, a programmed procedure of measuring the length of the abrasives is triggered. The measured wear is transmitted to the PLC which compensates it to always assure the pre-specified edge rounding pressure.

Demonstration Videos

DM1100 C Automated Version with Conveyors and Bar Code Reader


DM1100 C+
Working capacity (mm)1100x50
No. Cross belt stations1
Cross belt speed (m/s)3-8.1
Feeding speed (m/m)0.6-3.2
Cross Belt Motor (kW)(2x) 3
Feeding motor (kW)0.18
Total power (kw)6.5
Consumption (A)16
Dust extraction connection per head (Ø mm)205
Dimensions (mm)2212x911x1960
Weight (kg)1400



For more
informations about
this product contact us
by filling the form below.

    Send file (.pdf, .jpg up to 10MB)