Straight and Curved Tube Finishing
ML planetary system is suitable for straight and curved tubes finishing. In this operation the tube is not spinning since the abrasive belts rotate around the tube while this is safely transported by the feeding systems, guaranteeing low vibration.
By removing the feeding units these machines can process curved tubes manually. The operator simply guides the tube through the machine while the abrasive planetary system performs the finishing in the complete diameter of the tube.
Ø 50mm
ML50
– Narrow and flexible abrasives
– Very tight radii in small diameter tubes
– Manual feed
Ø 75mm
ML75
– Narrow and flexible abrasives
– Difficult curves finishing
– Manual or automatic feed
Ø 100mm
ML100
– Abrasive belts 50mm width
– Wide curves finishing
– Manual or automatic feed
Square Tube Finishing
Abrasive Belt & Brush
Rectangular tube and flat bar surface finishing machines up to three stations, combining abrasive belt with contact roller and abrasive brush.
The contact roller applies pressure in the abrasive belt to allow it to grind the flat surface, remove scratches and polishing the tube surface uniformly. The abrasive brush creates smooth finishing both in tubes and flat bars.
FG through-feed tube finishing machines operate normally in one side of the rectangular tube/flat bar only, but double-sided tube polishing machines are also available for higher productivity.
capacities
Wet Operation
These machines work with water cooling system in order to avoid overheating of the tubes and to reduce the risks associated with processing different metals and potentially explosive dusts.
FGW machines can be produced up to 6 finishing stations for one side of the tube surface. These tube and bar polishing machines are also produced in two and even four sides design, performing the surface finishing in 2 or 1 single step.
capacities
Abrasive Belt & Brush
Rectangular tube and flat bar surface finishing machines up to three stations, combining abrasive belt with contact roller and abrasive brush.
The contact roller applies pressure in the abrasive belt to allow it to grind the flat surface, remove scratches and polishing the tube surface uniformly. The abrasive brush creates smooth finishing both in tubes and flat bars.
FG through-feed tube finishing machines operate normally in one side of the rectangular tube/flat bar only, but double-sided tube polishing machines are also available for higher productivity.
Wet Operation
These machines work with water cooling system in order to avoid overheating of the tubes and to reduce the risks associated with processing different metals and potentially explosive dusts.
FGW machines can be produced up to 6 finishing stations for one side of the tube surface. These tube and bar polishing machines are also produced in two and even four sides design, performing the surface finishing in 2 or 1 single step.
capacities
capacities
Round Tube
Mirror Polishing
High quality mirror polishing in stainless steel, copper or aluminum tubes can be required in different industries. NS Máquinas developed different mirror polishing systems which operate with polishing wheels to guarantee a high gloss effect on the tubes surface, whether in round or rectangular tubes or flat bars.
Straight and Curved Tube Mirror Polishing
MP100
High gloss tube polishing, low vibration and possibility to operate straight and curved tubes up to Ø114mm are some of the main features of MP100 round tube mirror polishing machine. The planetary polishing system of MP100 consists in three polishing wheels rotating around the tube while it is transported automatically through the machine.
Centreless Mirror Polishing
RC200
Flexible tube polishing and finishing machines which operate with interchangeable abrasive belt and buffing wheel, allowing different types of finishing in a single station machine.
RC are centreless polishing machines. Tube is spinning and passing through a stationary finishing or polishing station. High diameter flexibility with solutions up to Ø315mm.
High Quality Mirror Polishing
PC70 2P
Perfect mirror polishing by clamping the tube in each extremity and moving the double polishing station along its length.
Developed for round, square and rectangular tubes, these PC70 polishing machines operate automatically with pre-defined cycles.
Straight and Curved Tube Mirror Polishing
MP100
Centreless Mirror Polishing
RC200
High Quality Mirror Polishing
PC70 2P
High gloss tube polishing, low vibration and possibility to operate straight and curved tubes up to Ø114mm are some of the main features of MP100 round tube mirror polishing machine. The planetary polishing system of MP100 consists in three polishing wheels rotating around the tube while it is transported automatically through the machine.
Flexible tube polishing and finishing machines which operate with interchangeable abrasive belt and buffing wheel, allowing different types of finishing in a single station machine.
RC are centreless polishing machines. Tube is spinning and passing through a stationary finishing or polishing station. High diameter flexibility with solutions up to Ø315mm.
Perfect mirror polishing by clamping the tube in each extremity and moving the double polishing station along its length.
Developed for round, square and rectangular tubes, these PC70 polishing machines operate automatically with pre-defined cycles.
Square Tube and Flat Bars Mirror Polishing
Through-Feed Mirror Polishing
PP220 2K
Two oscillating polishing wheels working on surface of the rectangular tubes and bars with capacity up to 220mm width.
High Quality Mirror Polishing
PC70 2P
Perfect mirror polishing by clamping the tube in each extremity and moving the double polishing station along its length.
Developed for round, square and rectangular tubes, these PC70 polishing machines operate automatically with pre-defined cycles.
Equipment
-
SZLIFIERKI DO PROFILI I PŁASKOWNIKÓW
FC120
Max szerokość120mm;
Praca na sucho;
Od 1 do 2 głowic;
Idealna do profili, blach i płaskowników o max szerokości roboczej 120mm. -
SZLIFIERKI DO PROFILI I PŁASKOWNIKÓW
FG170
Max szerokość 170mm;
Praca na sucho;
Od 1 do 3 głowic;
Profesjonalne wykańczanie powierzchni profili, blach i płaskowników o max szerokości roboczej 170mm. -
SZLIFIERKI DO PROFILI I PŁASKOWNIKÓW
FGW170
Max szerokość 170mm;
Praca na mokro;
Od 1 do 4 głowic;
Profesjonalne wykańczanie na mokro powierzchni profili, blach i płaskowników o max szerokości roboczej 170mm. -
SZLIFIERKI DO PROFILI I PŁASKOWNIKÓW
FG220
Max szerokość 220mm;
Praca na sucho;
Od 1 do 3 głowic;
Profesjonalne wykańczanie powierzchni profili, blach i płaskowników o max szerokości roboczej 220mm. -
SZLIFIERKI DO PROFILI I PŁASKOWNIKÓW
FG330
Max szerokość 330mm;
Praca na sucho;
Od 1 do 3 głowic;
Wielkie możliwości wykańczania powierzchni profili, blach i płaskowników o max szerokości roboczej 330mm. -
Rury okrągłe
ML100
Max średnica Ø114mm;
Rury proste I zagięte;
Jednogłowicowa;
Powtarzalne szlifowanie rur prostych I zagiętych do średnicy Ø114mm -
Rury okrągłe
ML50
Max średnica Ø50mm;
Rury zagięte ;
Jednogłowicowa;
Idealne rozwiązanie do szlifowania i wykańczania rur o max średnicy 50 mm i z małymi promieniemi zagięcia. -
Rury okrągłe
ML75
Max średnica Ø76mm;
Rury proste I zagięte;
Jednogłowicowa;
Idealne rozwiązanie do szlifowania i wykańczania rur o max średnicy 76 mm i z małymi promieniemi zagięcia. -
Rury okrągłe
MLW100
Max średnica Ø114mm;
Rury proste I zagięte;
Jednogłowicowa;
Powtarzalne szlifowanie rur prostych I zagiętych do średnicy Ø114mm -
Polerki na lustro
MP100
Max średnica Ø114mm;
Rury proste I zagięte;
Rury okrągłe;
Polerowanie na lustro z maksymalną powtarzalnością rur prostych oraz giętych do średnicy Ø114mm. -
Rury okrągłe, Polerki na lustro
RC200+RC250
Max Ø 256mm
Straight tubes
Straight round tubes
Round tubes finishing and mirror polishing in one flexible machine. -
Polerki na lustro
PC70 2P
Max 60 mm;
Proste elementy;
Rury, profile prostokątne;
Polerowanie na lustro rur, profili prostokątnych do wymiarów 60mm -
ODCIĄGI PYŁÓW
AS400
Moc silnika 4 kW;
Operacja na sucho;
Skuteczność filtracji 99,9%
Odciąg na sucho ze skutecznością filtracji na poziomie 99,9% -
ODCIĄGI PYŁÓW
AS200
Moc silnika 2,2 kW;
Operacja na sucho;
Skuteczność filtracji 99,9%
Odciąg na sucho ze skutecznością filtracji na poziomie 99,9% -
-
ODCIĄGI PYŁÓW
A
Moc silnika do 5,5 kW;
Operacja na sucho;
Proste oraz ekonomiczne odciągi przystosowane do pracy na sucho.
